home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BBS Toolkit
/
BBS Toolkit.iso
/
programs
/
mbprotd.zip
/
MBPRO.ZIP
/
PROMPTS.DAT
< prev
next >
Wrap
Text File
|
1993-03-17
|
6KB
|
172 lines
This is the MODEM-BASE Version 1.06 Prompts Data File.
MBPRO.DOC
DOS SHARE Detected
and
Memo File Opened OK.
NOVELL IPX Detected.
.
Configuration Database Opened OK.
Configuration Field Information OK.
Configuration Record Header Information OK.
Running in local mode - No Status Line.
Configured as Node #
No Node # passed on command line, running in Local Mode.
Reading Node #
Configuration DATA
-------------------------------------
CAN NOT read NODE CONFIGURATION FILE. Local Operation uses Record/Node 1.
Node Configuration Record Retrieved OK.
Configuration Info All Loaded.
is now closed.
Now setting up MBPRO and reading DOOR FILE for
Please enter first and last name (MAX 25) ->
MODEM-BASE DOOR is ACTIVE!
Linkage Database Opened OK.
Linkage Database Field Information OK.
Linkage Database Record Header Information OK.
Main Database Opened OK.
Main Database Field Information OK.
Main Database Record Header Information OK.
Default User Profile Database File is BAD or MISSING!
Default User Profile Database Opened OK.
System Default User Input Settings loaded.
*** PRESS ANY KEY TO RUN IN LOCAL MODE ***
MODEM-BASE Pro Main Menu for
[I] Display/Edit Default User Profile Information
[D] Display Info about MODEM-BASE Pro
[A] Add a RECORD to the DATABASE
[M] Color Mode On/Off (TOGGLE)
[S] Select Protocol to Use for File Transfers
[Q] Quit to BBS
is not allowed! Try again,
What is your Selection?
, Your User Profile [I]nformation from BBS is :
Fullname =
Phone Number(s) =
Phone1:
Phone2:
Company =
Modem Baud Rate =
DTE Baud Rate =
Minutes Left =
Protocol is =
Last Call Date =
# of Uploads =
Last File Scan =
Error Correction =
YES
NO
This information above is not configurable here, only via the BBS.
You may, however, VIEW/EDIT your Default User Profile.
Do you want to VIEW/EDIT your Default User Profile? (Y/N)
* User Profile Update Complete *
Would you like to UPLOAD your files first? (Y/N)
Upload Failure - No files found.
Which file do you want to ATTACH to this record?
*** ERROR *** Invalid CHOICE, Please try again :
Do you want to add another RECORD to the DATABASE? (Y/N)
Now you will need to upload your files to match
record(s).
Have the following file(s) ready for upload :
FILE# FILENAME JOB#
--------------------------
*** PROCESSED ***
Which file do you want to UPLOAD using Xmodem from the list above?
Processing files uploaded to the system by you :
*** ERROR *** Uploaded File:
does not match record file(s).
EXTRA (SUPPORT) FILES are included with Job #
There are still more file(s) that need to be uploaded.
Press [C]ontinue Uploading or [Q]uit RECORD(s) :
Your file(s) have been successfully uploaded and matches your
records(s). Your order has NOW been completed.
Do you want to UPDATE your USER PROFILE with these CHANGES? (y/N) :
>>> DEFAULT USER PROFILE UPDATED <<<
*** Invalid date input *** Try MM/DD/YY format.
Re-Enter date for this field :
*** THIS IS A REQUIRED FIELD - YOU CAN NOT LEAVE THIS FIELD BLANK ***
*** YOU ARE ALREADY USING THAT FILENAME ***
*** INVALID FILENAME *** MUST BE A DOS FILENAME. ***
Try your input again, or type QUIT to cancel record.
Upload file(s) NOW using ZMODEM protocol.
Upload file(s) NOW using YMODEM protocol.
Upload file(s) NOW using YMODEM-G protocol.
Upload file(s) NOW using XMODEM protocol.
Upload file(s) NOW using XMODEM-CRC protocol.
Upload file(s) NOW using XMODEM-1K protocol.
ONLINE DATABASE SYSTEM for
Current Job is
[---<Memo Editor>--+-----( Press [ESC] when finished to SAVE this Memo )------]
Processing file
and attaching to Job #
Below is a list of files uploaded to the system by you :
Your DEFAULT PROTOCOL is set to Xmodem.
Use Zmodem or Ymodem for batch transfer capability.
What is the name of the file you will be uploading?
Select which Protocol you want to use for file transfers :
[Z] Zmodem (Batch Allowed)
[Y] Ymodem (Batch Allowed)
[G] Ymodem(G) (Batch Allowed)
[X] Xmodem
[C] Xmodem CRC
[O] Xmodem 1K
[S] Select Protocol at time of Transfer
Enter a Protocol Letter from the list above :
*** ERROR *** Invalid Protocol, Enter again :
Which
What is the
you want?
*** MATCH NOT FOUND *** Type QUIT to end ***
Multiple Choice Answer - Select one of the above choice numbers :
Press [ENTER] for Default of
OR
Which [
#
] is your Choice?
*** BAD INPUT 5 TIMES *** ABORTING OPERATION! ***
ATTACHED File :
Enter [#] to change or Press [ENTER] to accept configuration :
Screen Display ON
Time Adjusted due to event.
Press [ENTER] to Continue
Sysop Chat Active.
Sysop Chat End.
Sysop Exited to DOS.
Sysop Returned from DOS.
[Enter=NONE]
[Enter=YES]
[Enter=NO]
Press [ENTER] to Continue, [N]o to Quit, or [NS] for NON-STOP?
-Pause-
*NO MEMO RECORD AVAILABLE*
[B] Browse/View/Search/Edit DATABASE
Our System Indicates that you already have a record in this database.
Only one RECORD is allowed per person for this database. Thank you.
Sorry, you do not have access to that command.
Sorry, you do not have access to any records in database, try [A]dding.
[-- TEXT VIEW/EDIT --( Use PGUP/PGDN/HOME/END/ARROWS or [ESC] to SAVE )-------]
Do you want to use the [
]ull Screen or [
]ine
TEXT EDITOR?
Which Menu Selection?
[--- Memo Display -+---( 5 Line Display - Type Field [#] for FULL MEMO )-------]
*END*
*** Warning ***
Editing this record will delete current contents.
If you want to edit a field [#], then type the field
number you wish to Edit at the command line prompt.
Do you still wish to EDIT THIS RECORD? (Y/N)
What Record # do you want to JUMP to?
*** Invalid Record # - Press Any Key to Continue ***
What Field # do you want to GO to?
*** Invalid Field # - Press Any Key to Continue ***
SORRY, 10 LEVEL MAXIMUM SEARCH TABLE. -
Enter the TEXT you wish to search for :
Please Stand By, Searching Data Base...
Any Record(s) found will be placed in a seperate Search Table Database.
Record # found :
End of File Reached. Press Any Key to Continue.
*** NO MATCH FOUND ***